Menu

Reply To: Slide image left and right..

Home Forums OSSC OSSC – Discussion and support Slide image left and right.. Reply To: Slide image left and right..

#15410

ShootTheCore
Participant

Try adjusting Output Options->Line 3X Mode. From the wiki:

Line3x mode
Controls the sampling and pixel clock multiplication mode for line3x.
Generic 16:9: Uses full horizontal sample rate without pixel multiplication, resulting to fully utilized 1280×720/864 output (16:9 aspect). Useful if connected to a CRT via DVI->VGA converter.
Generic 4:3: Uses 3/4 of full horizontal sample rate without pixel multiplication, resulting to 960×720/864 effective area of 1280×720/864 output (4:3 aspect). [default]
320×240 optim.: For advanced users only – requires clock and phase adjustments. Uses a sampling rate which matches the DAC rate of 426 dots per line used by some classic consoles (e.g. several PSX games) in 320×240 mode, resulting to pixel-perfect digitization. Output is pixel-multiplied by 3 in horizontal direction, resulting to 960×720 effective area of 1280×720 output. Note: If picture jitters when this mode is selected, adjust sampling phase until sweet spot is achieved.
256×240 optim.: For advanced users only – requires clock and phase adjustments. Uses a sampling rate which matches the DAC rate of 341 dots per line used by various classic consoles (e.g. NES, SNES) in 256×240 mode, resulting to pixel-perfect digitization. Output is pixel-multiplied in horizontal direction, resulting to 1024×720 or 768×720 (depending on 256×240 aspect setting) effective area of 1280×720 output. Note: If picture jitters when this mode is selected, adjust sampling phase until sweet spot is achieved.