Menu

Reply To: No HDMI audio in line4x mode on Panasonic VT60 plasma

Home Forums OSSC OSSC – Discussion and support No HDMI audio in line4x mode on Panasonic VT60 plasma Reply To: No HDMI audio in line4x mode on Panasonic VT60 plasma

#15840

BonzoBits
Participant

I had this problem after installing the audio board in a OSSC 1.5 and firmware 0.78. OSSC is connected direct to TV, using a SNES mini (borti’s RGB bypass board) and Lx4. Haven’t tried with other consoles.

Fix is this. Switch the audio down-sampling setting from default to non-default setting, then back to the default setting. This should restore the audio. Basically ‘turning it off and on again’ or it might be the other way around. My OSSC is currently dead so I can’t fire it up to check if audio down-sampling default setting is on or off.

Also, how good does the OSSC look on this TV? Does your VT60 show the OSSC image lower on the vertical axis than it should?