Your second test screen picture seems okay. There’s simply nothing more to see besides the grey rectangle and the black-to-white gradient:
D6 and D7 are between the ITE and the HDMI connector:
If you “only” took a look under a magnifying glas: i highly recommend measuring the continuity between adjacent pins of the HDMI connector too, since i had some cases where there was continuity (and a tinted and distorted picture) while there was no visible solder bridge – but after adding flux and reflowing the solder on all pins the problem (and continuity) was gone.
- This reply was modified 1 week, 2 days ago by Morpheus_79.