Menu

OSSC 1.6 – No audio or video output, garbled messages

Home Forums OSSC OSSC – Discussion and support OSSC 1.6 – No audio or video output, garbled messages

This topic contains 4 replies, has 2 voices, and was last updated by  BuckoA51 1 month ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #16108

    longsun_zhao
    Participant

    I’ve been happily using my OSSC since I received it in September, I was using the HDMI video output and analog audio passthrough just fine. I received a bunch of new equipment for streaming this week and noticed that I wasnt getting any audio out of the OSSC via HDMI no matter what system I was using. Furthermore, while trying to figure out what setting needed to be changed to enable HDMI audio, it seems that the while OSSC began to freak out, and now it won’t display any audio or video via any port. The screen is also displaying garbled messages. I have included a video of what’s going on with the screen with my model 1 Genesis plugged in via SCART.

    Is there anything I can do at this point or is my OSSC totally dead?

    #16156

    BuckoA51
    Keymaster

    Have you tried doing a settings reset?

    #16186

    longsun_zhao
    Participant

    I have attempted a settings reset, however I’m still not getting any video or audio output, as well as the garbled screen.

    #16286

    longsun_zhao
    Participant

    Nothing that I’ve tried has caused my OSSC to output anything anymore, and I confirmed that my devices were outputting audio just fine, even though the OSSC wouldn’t detect it. Would it be possible to get a replacement? Thank you.

    #16288

    BuckoA51
    Keymaster

    Yep sure please e-mail in using the contact form.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.