Program L336 remote with default codes

Home Forums OSSC OSSC – Discussion and support Program L336 remote with default codes

This topic contains 3 replies, has 2 voices, and was last updated by  BuckoA51 5 months, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #15470


    I wanted to save a few bucks and program my own L336 remote with the default OSSC codes, so I created this LIRC config to transmit the codes from my computer. Here’s the config for anyone that wants to do the same.

    begin remote
      name  ossc
      bits           32
      eps            30
      aeps          100
      header       9024  4512
      one           564  1692
      zero          564   564
      ptrail        564
      repeat		9024  2256
      gap          108000
      frequency    38400
          begin codes
              1                        0x3EC129D6
              2                        0x3EC1A956
              3                        0x3EC16996
              4                        0x3EC1E916
              5                        0x3EC119E6
              6                        0x3EC19966
              7                        0x3EC159A6
              8                        0x3EC1D926
              9                        0x3EC139C6
              0                        0x3EC1C936
              10+                      0x3EC1B946
              TOGGLE/RETURN            0x3EC17986
              PIC/CANCEL               0x3EC18D72
              MENU                     0x3EC14DB2
              EXIT                     0x3EC1ED12
              INFO                     0x3EC1659A
              CLOCK/EJECT              0x3EC1D12E
              REWIND                   0x3EC1619E
              FORWARD                  0x3EC1E11E
              L/R                      0x3EC1B54A
              PAUSE/ZOOM               0x3EC1C13E
              CHAPTER-                 0x3EC19D62
              CHAPTER+                 0x3EC15DA2
              STOP                     0x3EC1A15E
              PLAY                     0x3EC141BE
              LEFT                     0x3EC1AD52
              RIGHT                    0x3EC16D92
              UP                       0x3EC12DD2
              DOWN                     0x3EC1CD32
              OK                       0x3EC11DE2
              POWER                    0x3EC101FE
              VOL-                     0x1CE3F00F
              VOL+                     0x1CE3708F
              MUTE                     0x1CE318E7
              CH+                      0x1CE350AF
              CH-                      0x1CE3D02F
              TV/AV                    0x1CE3C837
              PNS                      0x1CE348B7
              TONE-                    0x5EA1D827
              TONE+                    0x5EA158A7
          end codes
    end remote


    Can you point us in the direction of the software that you need to do this with?



    You can use LIRC for linux or WinLIRC for Windows. Both use the same format for the remote config.

    As far as hardware, I made one of these with some parts I had laying around.



    Thanks, I’ll pop that up on the Wiki when I get a moment.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.