This topic contains 1 reply, has 2 voices, and was last updated by  marqs 2 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #8430


    All the console I have are working well except one…. Or half working….

    I am using this.

    dbGrafx Booster TTP

    With a luma cable from Retro cable Uk. The signal is not detect on the OSSC. Did try with a sync strike in case and not nothing else.

    It do work with the custom start cable that plug in the back, however the image quality is not great on this one either.
    Do you have solution for this?



    Is luma even available at dbGrafx minidin9? The store page mentions only RGB+CSYNC and CVBS under that connector, plus a dedicated s-video connector for luma+chroma.

    • This reply was modified 2 months, 1 week ago by  marqs.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.