Menu

Mythic

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • in reply to: Firmware v0.78 #14508

    Mythic
    Participant

    Update made my capture card compatible with 240p linex4 and 480p linex2. That’s awesome! But…. it made it not compatible with 480i passthrough 🙁 It doesn’t say no signal like it normally would if it wasn’t registering it, it just shows a black screen. Kinda need this to work, guess I have to revert back to 7.7

    Edit: Seems that reverting back to 7.7 doesn’t fix this issue. Normally switching to HDMI TX mode would make it work, but now it’s just a black screen.

    in reply to: Magewell and monitor read passthru as wrong resolution #13417

    Mythic
    Participant

    Whoa, no idea then.

    in reply to: Magewell and monitor read passthru as wrong resolution #13415

    Mythic
    Participant

    Try switching the HDMI/DVI setting under output. That worked for me.

    in reply to: PS2 Advice #13153

    Mythic
    Participant

    I have had the exact same issue using x2. I have switched to only using Passthrough as to me it looks about the same and has no screen wobble. You could also use something like GSM or Xploder to boot into 480p where you can do x2 without the wobble.

    in reply to: Recommend Capture Card for OSSC @ Line 3x? #13124

    Mythic
    Participant

    Startech USB3HDCap is what I use.

    Works on line x3 for SNES, N64, Playstation
    Passthrough on PS2, Wii
    And HDMI sources like PS4, PS3, Switch.

    I haven’t tested it with the other consoles you listed, but I’m sure it will work.

    – I use it with OBS on the PC. Not sure if it’s for Mac aswell as I haven’t checked.

    in reply to: Issue with Component and my capture card. #13076

    Mythic
    Participant

    After the .77 update, when I turn TX mode to HMDMI, I no longer have an issue with 480i Passthrough. :D!

    in reply to: capture card for 3x or higher #12955

    Mythic
    Participant

    Startech USB3HDCap

    Works great for me with Snes using OBS.

    in reply to: Issue with Component and my capture card. #12920

    Mythic
    Participant

    Got in my new PS2. Xploader and GSM are super wonky. While it works for now so I can capture, I’m hoping maybe this issue gets fixed eventually.

    in reply to: Issue with Component and my capture card. #12751

    Mythic
    Participant

    I have a new PS2 coming in the mail as mine was too new to use FreeMCBoot. Going to just boot my games into 480p using that and hopefully it works fine. Otherwise, I have not been able to solve the issue.

    in reply to: Issue with Component and my capture card. #12334

    Mythic
    Participant

    It does support it

    It also works fine if I just connect it via the component adapter that it came with, but obviously not upscaled.

    in reply to: Audio from component #12105

    Mythic
    Participant

    Amazon Link
    Something like that should do just fine.
    Just convert it to a stereo jack with that and plug that into your speakers.

    in reply to: Invalid Firmware Image? #11039

    Mythic
    Participant

    ^ Was exactly how I got mine to work. I just kept hitting update then it worked.

    in reply to: Reserve list backlog – Check your spot! #10602

    Mythic
    Participant

    Have you tried using another internet browser? Also, have you tried to right click and copy the link? When I do that and paste it, it will tell me my number.

    in reply to: Compatible USB HDMI capture devices? #8819

    Mythic
    Participant

    I’m not really sure how well I can help you with that as I’m not super knowledgeable as to how these things work. I tried plugging in an S-Video Snes connection to my Elgato. It registers it as either 480i or you can use a setting to convert it to 480p (Which when capturing looks much nicer). Same with Composite although it looks rubbish either way with Composite. I cannot capture true 240p with the Elgato HD. Although, I don’t capture much for 240p sources anyway. The extent of what I intend to upscale with the OSSC are Snes, N64 (Both RGB modded), PS2 (For PS2 and PS1 games), and Wii (For Wii and Gamecube games). This will only be using either Scart input or Component input. While, I’m not very knowledgeable on this subject I’m pretty sure everything I intend to use it for is already 480i or higher?

    When dealing with 240p source material with the Elgato, I used the 480p option, sent it to my Avermedia, and then captured it just how it came out from that.

    Sorry if I am unable to answer that question.

    Also, if I was wrong about something (Which I probably was), please correct me as I hardly know what I’m talking about.

    in reply to: Compatible USB HDMI capture devices? #8811

    Mythic
    Participant

    I have an Elgato HD, Roxio HD Pro, and an internal Avermedia Live Gamer HD I can test when I get a unit, which should be in the next batch. I know previously with the Avermedia, I would have to go through my Elgato for 240p and my Roxio for 480 to get the Avermedia to register the content. We’ll see what changes with the OSSC.

Viewing 15 posts - 1 through 15 (of 15 total)