OSSCs are now out of stock! More stock is due mid February 2019.
1.6 Revision – Includes an extra 3.5mm audio input and has analogue to digital conversion as standard, no need for a separate upgrade board. See here for more information.
Important! – We give you the option to purchase the OSSC without power supply unit (PSU) or remote, so that you can use suitable replacements you may already have yourself. Information on using alternative remotes is available here. Please note the specs of the required PSU carefully. You require a unit that outputs DC 5V with at least 1 Amp. The tip must be 2.1 x 5.5mm and centre positive. Please note that damage caused by using an incorrect PSU is not covered under the warranty.
Need a different number of accessories? Do you want 2 power supplies but only one remote, or a spare remote perhaps? Leave the boxes above un-checked and add additional power supplies here, remotes here, remote overlays here or JP21 adapters here. For quantities greater than 6 OSSC units please contact us.
Customers in Asia please note – RGB cables are wired slightly differently in your region (despite having the same physical connectors). If you want to use JP21 RGB cables with your OSSC, please also order a JP21 adapter. This adapter is NOT required for the more common Euro SCART cables (as purchased from Retrogamingcables.co.uk, Retro Console Accessories or most dealers in the EU, Australia and America).
It’s finally here! The ultimate lag-free retro gaming linedoubler and processor hits the market. Now there’s an affordable way to use your retro consoles on your PC monitor or TV in perfect quality. No more bad upscaling, no more interlacing artefacts, no more high input lag, the OSSC is a dream for retro gamers and collectors!
What does it do?
Processes (line doubles) retro games with NO input lag – Unlike other scalers, such as the XRGB Mini, the OSSC works on individual scanlines rather than a frame at a time, that means there’s no input lag whatsoever (well, a few nanoseconds if you really want to be precise).
Eliminates ugly deinterlacing artefacts and bad scaling – Connect most retro consoles to your TV and if you get a picture at all, it’s likely to be ugly. Bad scaling combined with deinterlacing (which should never even be applied to 240p material) will ruin the picture and make you wish you had your old CRT back. Well, worry no more! OSSC converts the image into a 480p or 720p (where compatible) image that is correctly displayed and processed. EVERY special effect, from 240p drop shadows to striped sprites, is rendered correctly.
Converts SCART and Component to DVI/HDMI – Feed in a 480p component video signal from a Wii and get out a perfectly processed 480p HDMI or DVI (with a simple adapter) image. The quality is flawless!
Convert VGA to DVI/HDMI – Connect a Dreamcast directly to the unit and enjoy HDMI processing of all your games, not just those that support 480p.
Convert analogue audio to digital DVI/HDMI *NEW* – Analogue audio from your retro games console will be converted to digital audio and injected into the HDMI/DVI output (requires compatible TV, processor or AV receiver. Analogue audio output is still available for setups where this is required).
Fast deinterlacer – Fed up with high input lag on interlace games? The OSSCs deinterlacer is lag free! Note that this does however mean there’s a drop in picture quality for interlace sources, but this is unavoidable. A pass through mode, where interlace signals are sent directly to the TV for processing instead, is also included.
For more information, click here.
What are other people saying?
Don’t take our word for it, check out these other reviews around the web.
Documentation, support and returns
In addition to the standard 1 year EU warranty, we’re also giving a one-month no quibble return for all units. Test the OSSC in your setup and if it doesn’t work, return it to us for a full refund. All we ask is that you pay return postage and send the complete unit with packaging and any accessories undamaged. Contact us here if you need to return a unit.
- 1 X SCART – Supports RGBs (clean csync, cvideo sync, luma sync), RGsB, Ypbpr
- 1 X Component video – Supports Ypbpr and RGsB signals
- 1 X D-SUB15 (VGA) – Supports RGBHV, RGBs, RGsB, Ypbpr
- 2 x 3.5mm analogue audio – Supports all analogue audio. Input 1 can be toggled between output (from AV1/SCART) or input
- Composite video and S-Video are NOT supported and require an adapter/transcoder
- 1 X HDMI or DVI-D (with adapter) (digital only, including audio). Full-range 24-bit RGB output through DVI/HDMI
- 1 X Analogue audio 3.5mm (input/output toggle)
Supported input resolutions
- 240p/288p/480i/576i 15khz
- 25Khz medium-res modes
- 480p/576p/720p/1080i 31khz
Supported output resolutions
- 240p/288p -> 480p/576p or 720p line triple (compatible displays only)
- 240p/288p -> 1280×960, 1280×1152, 1080p, 1600×1200 line quadruple/quintuple (compatible displays only)
- 25Khz medium-res modes -> 480p
- 480i/576i -> 480p/576p or pass-through
- 480p -> pass-through or 960p line-double (compatible displays only)
- all other 31khz resolutions passed through
- Back lit LCD
- SD Card socket for firmware updates
- JTAG connector
- IR receiver
- DC 5V 1 Amp – 2.1 x 5.5mm positive tip
Submit your review
Ordered from Aus - fast delivery and good packaging - thing works so well i nearly fell off my couch. combined with a good quality cable you cannot go wrong. Thanks!!
Tested on Sega Megadrive 1 and Master system 1 through RGB SCART. have not tested other functions but the remote is worth buying just for the options.
Woah. I was a bit skeptical about being able to hook up my SNES to a UHD monitor, but it works. so. damn. well! Seriously blown away by the quality and especially the complete lack of lag compared to my last setup.
For reference (for the googlers). I have a 1chip-01 SNES, SCART SNES cable, an LG 32UD59-B monitor, and I use an Elgato 4k60 Pro. Everything runs smooth and streaming with it works flawlessly.
Having used a Scart/VGA/Hdmi and scanline generator and the output was ok, but it lost it's RGB colour,I decided to go for the Ossc, best decision ever, it stays RGB and the options are great, updating the firmware was easy after watching the video. Buying from here is easy and convenient ..?
I've had my OSSC since December of last year and it's been an absolute blast. All output modes work perfectly on my BenQ RL2455HM monitor and the image quality for both my Saturn and PS2 (when using progressive video modes) is absolutely pristine.
My only real complaint is the lack of a more sophisticated deinterlacing method, as the flickering caused by bob deinterlacing can be quite distracting. I'd definitely be willing to buy another unit if they ever make a new revision with hardware capable of utilizing better deinterlacing solutions.
The conversion looks great (my snes looked like butt with the standard converters). More importantly they STAND BY THEIR PRODUCT. My first unit was defective and they shipped me a new one promptly after receiving the defective unit. Appreciated the quick communication, and prompt shipping.
I've been using the OSSC for about a year now and couldn't be happier! After some twiddling with the many options of the OSSC and a few adjustments to my TV's settings (which by default didn't give the optimal picture for any of my applications, including my PC and disabled all the optimizations), my Japanese Mega Drive output looks better than ever (also thanks to a good RGB SCART cable). Thanks to a vivid picture with nice colors and blacks and of course the scanlines, give a classic arcade-like experience on my 4K TV, which is great. Recommended!
Finally, I got the best picture for Playstation 2!
XRGB-mini Framemeister could not do this!
Thanks Sergey! While we're glad you love the OSSC, for the PS2 the XRGB-mini is usually the better choice, since the OSSC does not have sophisticated deinterlacing and most PS2 games run in 480i.
Works great with a little cheap magnovox tv, (19mf1377b usa model) actually works with snes on all resolutions. Doesnt work with my 75xbr900e 4k with snes but works with the sega genesis (megadrive). However the snes works with tv if im connected thru my av receiver marantz sr6010. I am extremely happy and it is a big upgrade over the cheap scart to hdmi converter.
Unfortunately my main tv doesn't handle the Snes signal at all, but I have to say it does handle the line quintuple 5x mode and for the consoles it works for it is the best possible picture. I can't say enough. I have a framemister as well and this puts it to shame. Zero lag, crisp clear RGB I can't ask for more.
As far as consoles I've tried, Sega Saturn and Sega Genesis with euro-scart and Sega Dreamcast using vga and everything is beyond prefect.
One thing I was worried about was sound. I got the 1.6 with HDMI and the sound is perfect.
***If you are buying this for the Snes be careful as some tvs cannot handle it's weird refresh rate. Also the line tripler (720p) and above does not work for every tv.
I have a Sony Bravia 65" 4k and the line multipliers worked prefectly, so we'll in fact, I don't mind the my snes being incompatible with my main tv.
Although,I wonder if I bought a pal snes at 50hz if that would help compatibility.
But, as long as you understand what you are buying you will be 200% happy!
Thanks Mr "Q" :). We're still working on the SNES problem and hope to have a simple hardware mod out this year for the SNES that tackles that.
It's just awesome how beautiful my snes and my n64 can look on my TV. I'm also very surprised that line 5x mode works on my Samsung TV.
If your country is not listed as a shipping destination please contact me, I may be able to sort something out for you!
Transactions made in our store are 100% safe, SSL encrypted and guaranteed by our payment provider Stripe. Please use a modern browser to shop on our site, we do not support Internet Explorer 9 or earlier and may cancel transactions placed with those browsers.
Please dispose of your unwanted electrical items responsibly and for free at your local recycling centre. See our page here for more information.