Replacement PSU for OSSC, RetroTINK 2X or Time Sleuth

Quality replacement power supply unit (PSU) for the Open Source Scan Converter (OSSC). 5 volt output at 1.5 amps maximum. The PSU also fits the Koryuu transcoder and all the RetroTINK family of devices (excluding Retrotink 4K) or the Time Sleuth input lag tester with an optional adapter. This unit has been extensively tested with the Open Source Scan Converter and is guaranteed to work perfectly. Rated for worldwide use with 100 to 240 volts input. It comes with four power connectors (see pictures), allowing it to be used in most of Europe, the USA, Australia and lots of other countries.

Optionally we can also supply an adapter to make this unit work with the RetroTINK family or Time Sleuth too. This is handy if you don’t have a spare USB device available to power your device. Make sure you select the optional adapter box above if you want to use this PSU with your RetroTINK and/or Time Sleuth.

Not recommended for OSSC Pro or Morph 4K – These scalers may draw too much current for this particular PSU. Click here for a PSU suitable for these products.

Product compliance information (EU Responsible Person)
Name:Total Power Europe BV
Address:Kloosterstraat 5,4901 HR,Oosterhout NB,The Netherlands
Email:in**@********er.nl